Copyright © 2024 | RankoFishing. All rights reserved.
Rankofishing only works with raw materials that comply with our strict material requirements. As such, we conduct regular testing with materials provided by suppliers until we get materials that match our standards.
As for the mold suppliers, Rankofishing is asking them to take full responsibility on the final products performance and all molds shipped into Rankofishing production line must be subject to strict premold tests in their factory.
Part of our optimized production process is paying close attention to the finest details on the fishing lure designs and molds.
Molds must closely match the initial design, with each specific detail appearing on the mold and no visible damage within or around the mold.
Plastic parts must have minimal shrinkage with a clearance of 0.1-0.3mm. Proportion of the nozzle material should not exceed 15%. Parts that need coloring must not use materials that don’t adapt well to color, with Pantone numbers given as color samples.
Ratio of the maximum wall thickness should not go beyond 3:1, with the weight deviation of the counterweight within ± 5% of the standard weight. Sharp corners are removed to avoid injury.
Preferring simple shapes, hardware parts must avoid burrs or sharp edges that can cause injury. Tolerance is given when positioning holes, while parts for electroplating require details including surface roughness and coating thickness.
Through conducting several tests on every lure, we manage quality consistency and ensure each lure is created equally.
Making sure no deformation, damage, or scratches are visible on the surface, the shape, color, and design is scanned by our quality assurance team. Hardness of the bait’s plastic parts is also tested on regular intervals, making sure that the deviation is well within the allowed amount of ±3%.
Materials are tested before production, guaranteeing each part matches our quality guidelines. After molding and assembly, the completed hard baits are subjected to several tests, including color testing, water immersion, and durability tests to review the bait’s performance.
From material testing and design review, the metal bait’s shape, color, and weight are examined based on established standards. Fish hook is secured to avoid damaging the bait and the user.
Rankofishing prides itself as a reliable manufacturer of quality fishing lures, satisfying diverse market demands for over 10 years. However, if you require further certifications from international bodies, including CL65, RoHs, and the like, inform our team and we will provide the necessary certifications for you.
